Chapter
4
Code V Feature (VGL)
Power On ^X
Selects the ignore mode power up condition. Refer to the 6400 Code V
Programmer's Reference Manual for more information.
•
Disable. (the default.) Does not select the ignore mode as the power-up
default.
•
Enable. Selects the ignore mode as the power-up default, and selects the
graphics mode (cc)PY as the power-up default. All characters are ignored
until a (cc)A command is received.
Power On ^F
Enable Free format causes the Code V to ignore carriage returns, line feeds
and all characters below 20 hex sent from the host. Refer to the
6400 Code V User's Manual for more information on Free Format.
•
Disable. (the default.) Does not select free format as the power-up
default.
•
Enable. Selects free format as the power-up default, and selects the
graphics mode (cc)PY as the power-up default.
Power On ^PY
Selects the graphics mode power up condition. Refer to the 6400 Code V
Programmer's Reference Manual for more information.
•
Disable. (the default.) Does not select the graphics mode (cc)PY as the
power-up default.
•
Enable. Selects the graphics mode (cc)PY as the power-up default.
Lines Per Inch
Defines the number of lines per inch for the Code V to use. Can also be set by
using the ^@L command. The following number of lines per inch may be
selected:
•
6 (the default.)
•
7
•
8
•
9
•
10
Graphics Option
Slashed Zero
•
Disable. (the default.) Prints zeros without a slash (0).
•
Enable. Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital "O."
168