Using The Operator Panel - IBM 6400 Setup Manual

Chapter 3

Using The Operator Panel

NOTE:
Using The Operator Panel
Power
READY
Ready
Processing
Menu
Printer Con-
Attention
figuration
The operator panel is shown above. During the configuration process, you will
use the Scroll↑, Scroll↓, Enter, and Return keys on the operator panel to
access configuration settings and diagnostic tests via the configuration
menus. As you access menus and options, menu names and option values
appear on the operator panel message display (sometimes referred to as
LCD, or Liquid Crystal Display).
This chapter provides numerous examples of how to use the operator panel
keys and indicator message display to configure the printer.
90
(1)
The Twinax and Coax interface menus only appear in the menus if
the IBM Coax/Twinax feature is installed.
(2)
The Early Print Complete option appears in the Twinax menu only
if the IPDS feature is installed.
(3)
IPDS, Code V Emulation, and IGP Emulation options appear in the
menus only if these features are installed. Menus are shown in
Appendix D.
(4)
Ethernet information only appears when the ethernet feature is
installed.
(5)
Ether the Ethernet Interface menu or the Parallel Interface menu
will display. They cannot display at the same time.
(6)
If installed.
(7)
Not if 4234-12 is running IPDS code.
(8)
Only if Autoswitching is enabled.
(9)
Only if Coax Emulation is enabled.
Micro
Scroll Enter
Micro
Scroll Return
Figure 65. The Operator Panel
Line Form Start
Feed Feed
View Set Top Stop
of Form
Cancel
Eject/
Restore