Loading Custom Sets Or Factory Default Values - IBM 6400 Setup Manual

Loading Custom Sets or Factory Default Values

CONFIGURATION
MANAGEMENT
Recall
Save Current
Custom Set
Values
Factory Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
* = Factory Default
You can load any of the custom set configurations or the factory default
configuration. (Factory default parameters are shown starting on page 3–10.)
The loaded configuration remains active as long as the printer is on. The
following procedure shows how to load factory defaults to the printer.
If you power off the printer, the power-on configuration will load the next
time the printer is powered on. Page 3–25 explains how to select the
power-on configuration.
Step Key
1.
Press:
Stop
2.
Scroll
3.
Menu
Delete
Custom Set
Result
NOT READY
OPERATOR MENU
+
Scroll
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
Change
Protect
Power On Set
Custom Sets
Places the printer in
NOT READY mode.
Unlocks the Operator
Menu, which allows
you to load a
configuration.
Displays the first
Configuration Main
Menu option,
PRINTER CONTROL.
Chapter 3. Configuring the Printer
Print Custom
Set Values
Notes
3–23