Oil Pump - Suzuki GW250 Service Manual

CLUTCH RELEASE BEARING INSPECTION
Inspect the clutch release bearing for any abnormality, particu-
larly cracks, to decide whether it can be reused or should be
replaced.
Smooth engagement and disengagement of the clutch depends
on the condition of this bearing.
CLUTCH SLEEVE HUB/PRIMARY DRIVEN GEAR ASSEMBLY
Inspect the slot of the clutch sleeve hub 1 and primary driven
gear assembly 2 for damage or wear caused by the clutch
plates. If necessary, replace it with a new one.
CLUTCH PUSH ROD
Inspect the clutch push rod for damage and bend. If necessary,
replace it with a new one.

OIL PUMP

INSPECTION
Rotate the oil pump by hand and check that it moves smoothly.
If it does not move smoothly, replace the oil pump assembly.
* Do not attempt to disassemble the oil pump assembly.
* The oil pump is available only as an assembly.
ENGINE 3-41