5-12 FUEL SYSTEM AND THROTTLE BODY
THROTTLE BODY REMOVAL
• Remove the fuel tank. (5-2)
• Disconnect the fuel injector lead wire couplers 1.
• Disconnect the PAIR hose 2 from the air cleaner box and
ISC valve coupler 3.
• Disconnect the TP sensor coupler 4, ISC valve hose 5, fuel
feed hose 6, IAP sensor hose #1 7 and IAT sensor coupler
8.
• Disconnect the IAP sensor hose #2 9 and ignition coil clamp
0.
• Disconnect the throttle cables A from their drum.
NOTE:
After disconnecting the throttle cables, do not snap the throttle
valve from full open to full close. It may cause damage to the
throttle valve and throttle body.
• Remove the air cleaner box mounting bolts.