Engine Components Inspection And Service; Cylinder Head Cover; Pair Reed Valve - Suzuki GW250 Service Manual

ENGINE COMPONENTS INSPECTION AND SERVICE

Identify the position of each removed part. Organize
the parts in their respective groups (i.e., intake,
exhaust) so that they can be installed in their original
positions.

CYLINDER HEAD COVER

• Clean and check the gasket grooves A and PAIR reed valve
gasket mating surfaces B of cylinder head cover.
If it is damaged, replace the cylinder head cover with a new
one.

PAIR REED VALVE

REMOVAL
• Remove the PAIR reed valve cover 1 and PAIR reed valve
2.
INSPECTION
• Inspect the reed valve for the carbon deposit.
If the carbon deposit is found in the reed valve, replace the
PAIR reed valve with a new one.
INSTALLATION
• Install the PAIR reed valve and PAIR reed valve cover.
(10-25)
• Apply thread lock to the bolts 1 and tighten to the specified
torque.
 99000-32110: THREAD LOCK CEMENT SUPER "1322"
 PAIR reed valve cover bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
or equivalent
ENGINE 3-25