Master Cylinder Inspection - Suzuki GW250 Service Manual

8-60 CHASSIS
• Pull out the dust boot 0 and remove the snap ring A.
 09900-06108: Snap ring pliers (Close type)
• Remove the stopper plate B, piston cup set C and spring D.

MASTER CYLINDER INSPECTION

MASTER CYLINDER
Inspect the master cylinder bore for any scratches or other dam-
age.If any damage is found, replace the master cylinder with a
new one.
PISTON
Inspect the piston surface for any scratches or other damage. If
any damage is found, replace the piston with a new one.
RUBBER PARTS
Inspect the primary cup, secondary cup and dust boot for wear
or damage. If any defects are found, replace it with a new one.