Reassembly And Installation - Suzuki GW250 Service Manual

REASSEMBLY AND INSTALLATION

• Install a new oil seal with the special tool.
 09913-70210: Bearing installing set (10 – 75 )
NOTE:
The stamped mark on the oil seal faces mechanical seal side.
• Apply a small quantity of the grease to the oil seal lip.
 99000-25010: SUZUKI SUPER GREASE "A"
• Install the new mechanical seal using a suitable size socket
wrench.
NOTE:
On the new mechanical seal, the sealer A has been applied.
• Apply molybdenum solution to the impeller shaft 1 and
washer 2.
 MOLYBDENUM OIL SOLUTION
• Install the impeller shaft 1 and washer 2 to the water pump
body.
COOLING AND LUBRICATION SYSTEM 7-17
or equivalent