Reassembly And Installation - Suzuki GW250 Service Manual

DAMPER ROD RING
Inspect the damper rod ring for wear or damage. If it is worn or
damaged, replace it with a new one.

REASSEMBLY AND INSTALLATION

Reassemble and install the front fork in the reverse order of
removal and disassembly. Pay attention to the following points:
* Thoroughly wash all the component parts being
assembled.
* When reassembling the front fork, use new fork oil.
* Use the specified fork oil for the front fork.
INNER TUBE
• Install the following parts onto the inner tube.
2 Outer tube slide bushing
3 Spacer
4 New oil seal
NOTE:
The stamped mark on the oil seal must face upward.
• Apply fork oil to the inner tube slide bushing 1, outer tube
slide bushing 2 and the lip of oil seal 4.
 99000-99044-10G: SUZUKI FORK OIL G-10
• Insert the oil lock piece 5 into the inner tube.
NOTE:
* When installing the oil lock piece, insert the tapered end A of
oil lock piece into the inner tube.
* When inserting the inner tube into the outer tube, take care not
to come off the oil lock piece from the inner tube.
or equivalent
CHASSIS 8-19