Combination Meter; Description - Suzuki GW250 Service Manual

9-26 ELECTRICAL SYSTEM

COMBINATION METER

DESCRIPTION

This combination meter mainly consists of the stepping motor, LCD (Liquid Crystal Display) and LED (Light
Emitting Diode).
The rpm pointer is driven by the stepping motor.
The LCDs indicate Speed, Odo/Trip 1/Trip 2/Clock/Gear position, Eco/Norm and Fuel level indicator respec-
tively.
LED (Light Emitting Diode)
LED is used for the illumination light and each indicator light.
LED is maintenance free. LED is less electric-power consuming and stronger to vibration resistance com-
pared to the bulb.
1 ADJ button (Trip 1/Trip 2/Clock/Eco/Norm/Maintenance)
2 Tachometer
3 LCD (Speedometer)
4 LCD (Odo/Trip 1/Trip 2/Clock/Maintenance/FI (DTC))
5 LCD (Fuel level indicator)
SEL button (Odo/Trip 1/Trip 2/Clock/Eco/Norm/
6
Maintenance)
7 LCD (Gear position)
8 LCD (Eco/Norm)
9 LCD (Maintenance)
0 LED (Neutral indicator light)
A LED (High-beam indicator light)
B LED (Turn signal indicator light)
C LED (Engine rpm indicator light)
LED (Engine coolant temperature indi-
D
cator light)
E LED (Oil pressure indicator light)
F LED (FI indicator light)