3-42 ENGINE
STARTER CLUTCH
STARTER DRIVEN GEAR INSPECTION
• Install the starter driven gear to the starter clutch and turn the
starter driven gear by hand to inspect the starter clutch for a
smooth movement. The gear turns one direction only. If a
large resistance is felt to rotation, inspect the starter clutch for
damage or inspect the starter clutch contacting surface of the
starter driven gear for wear or damage.
I they are found to be damaged, replace them with new ones.
• Inspect the starter driven gear bushing for any damage.
If necessary, replace it with a new one.
DISASSEMBLY
• Hold the generator rotor with the special tool and remove the
starter clutch bolts.
09930-44521: Rotor holder
• Remove the one way clutch 1 from the guide 2.