Inspection - Suzuki GW250 Service Manual

8-18 CHASSIS
• Remove the dust seal F and oil seal stopper ring G.
Be careful not to damage the inner tube.
• Pull the inner tube out of the outer tube.
• Remove the oil lock piece H.
• Remove the following parts from the inner tube.
I Outer tube slide bushing
J Spacer
K Oil seal

INSPECTION

INNER AND OUTER TUBES
Inspect the inner tube sliding surface and outer tube sliding sur-
face for any scuffing and damage. If any defects are found,
replace them with new ones.
FORK SPRING
Measure the fork spring free length. If it is shorter than the ser-
vice limit, replace it with a new one.
 Front fork spring free length:
Service Limit: 270 mm (10.6 in)