Removal - Suzuki GW250 Service Manual

REMOVAL

• Loosen the axle nut 1.
• Raise the rear wheel off the ground and support the motorcy-
cle with a jack or wooden block.
Make sure that the motorcycle is supported securely.
• Remove the axle nut 1 and draw out the rear axle 2.
• With the rear wheel 3 moved forward, remove the drive chain
4 from the sprocket 5.
• Remove the rear brake caliper assembly 6 by moving it rear-
ward.
• Pull the rear wheel 3 rearward.
NOTE:
Do not operate the brake pedal with the rear wheel removed.
• Remove the collar 7.
• Remove the brake disc 8.
• Remove the spacer 9.
• Loosen the rear sprocket nuts.
• Draw out the rear sprocket mounting drum 0 from the wheel
hub and separate the rear sprocket A from the mounting
drum 0.
CHASSIS 8-33