Maintenance; Inspection Guide - Lexmark MS81x Service Manual

Maintenance

•
"Inspection guide" on page 533
• "Scheduled maintenance" on page 535
•
"Preventive maintenance" on page 538
•
"Lubrication specification" on page 538
• "Cleaning the printer" on page 538

Inspection guide

The purpose of this Inspection guide is to aid you in identifying the intervals, based on page count, at which parts must
be Inspected (for visible physical damage), cleaned, or replaced.
If any unsafe conditions exist, find out how serious the hazard could be and if you can continue before you correct the
hazard.
As you service the machine, check for the following:
•
Damaged, missing, or altered parts, especially in the area of the On/Off switch and the power supply
• Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover
•
Possible safety exposure from any non-Lexmark attachments
•
Printer and input options are sitting flat (for example, not sitting on cables or hanging over a ledge)
• Printer is properly set on any input options
Use the following tables to determine when specified parts should be inspected:
Lexmark MS81x
Media tray—All
Media tray side guides
Media tray length guides
Separation roller
Tray lift gear assembly
Transfer roller
Fuser
Media feeders—All
Media tray pick roller
MPF pick roller
Covers and doors
EVERY EVERY 200K
SERVICE CALL PAGES
Inspect Inspect
Inspect Inspect
Inspect, clean Replace
if needed
Inspect Inspect
Inspect Replace
Inspect Replace
Inspect, clean Replace
if needed
Inspect, clean Inspect, clean if
if needed needed
Maintenance
533
NOTES
Check for correct positioning.
Check for correct positioning.
Clean with damp cloth.
Ensure correct operation.
Ensure correct installation.
Ensure correct installation.
Clean with a damp cloth.
Clean with a damp cloth.
4063