4
Remove the LVPS. See
5
Remove the left cover. See
6
Remove the PCBA housing. See
7
Remove the main drive motor. See
8
Remove the harnesses from the clamp (A).
9
Remove the three screws (B) securing the fuser drive motor to the machine.
Note: When removing the lowermost screw, the grounding plate will become detached.
10
Disconnect the cable (C) from the fuser drive motor.
"LVPS removal" on page
"Left cover removal" on page
"PCBA housing removal" on page
"Main drive motor removal" on page
Repair information
366.
277.
357.
352
354.
4063