Lexmark MS81x Service Manual page 163

Error code Description
414.71 Diverter failed to leave its home position on the
output option 2/output expander
414.72 Diverter failed to reach its home position on the
output option 2/output expander
417.01 Media remains detected by the output option
3/output expander sensor (pass through) after power
on.
417.03 The media fed did not reach the output option
3/output expander sensor (pass through).
417.05 The media while feeding remains detected by the
output option 3/output expander sensor (pass
through).
417.09 Never received Page In Output from output option
3/output expander
417.10 Invalid Page ID returned by output option 3/output
expander
417.41 Output option 3/output expander main/interface
motor stalled
417.42 Output option 3/output expander main/interface
motor did not reach the required speed.
417.43 Took too long to ramp up main/interface motor in
output option 3/output expander
417.53 Output option 3/output expander main/interface
motor did not reach the required speed.
417.71 Diverter failed to leave its home position on the
output option 3/output expander
417.72 Diverter failed to reach its home position on the
output option 3/output expander
Action
1
Reseat all the installed output options on the
printer.
2
Open the rear door and clear obstructions along
the paper path.
3
Make sure that the sensors (pass through) are
free from obstructions.
If the problem remains, then go to
expander jam service check" on page
1
Reseat all the installed output options on the
printer.
2
Open the rear door and clear obstructions along
the paper path.
3
Make sure that the sensors (pass through) are
free from obstructions.
If the problem remains, then go to
expander jam service check" on page
1
POR the machine.
2
Reseat the output option on the printer.
3
Open the rear door and clear obstructions along
the paper path.
If the problem remains, then go to
expander failure service check" on page
1
Reseat all the installed output options on the
printer.
2
Open the rear door and clear obstructions along
the paper path.
3
Make sure that the sensors (pass through) are
free from obstructions.
If the problem remains, then go to
expander jam service check" on page
Diagnostic information
163
4063
"Output
191.
"Output
191.
"Output
141.
"Output
191.