Lexmark MS81x Service Manual page 196

Actions
Step 11
Using the subnet address supplied by the network administrator, assign
a unique IP address to the printer.
Note: The printer IP address should match the IP address on the printer
driver.
Did this fix the problem?
Step 12
Is the device physically connected (ethernet cable) to the network?
Step 13
Try using a different ethernet cable.
Did this fix the problem?
Step 14
Have the network administrator check the network drop for activity.
Is the network drop functioning properly?
Step 15
Is the printer on the same wireless network as the other devices?
Step 16
Assign the correct wireless network to the printer.
Did this fix the problem?
Step 17
Are the other devices on the wireless network communicating properly?
Step 18
Verify that the wireless card is properly seated on the controller board.
Is the wireless card seated correctly?
Step 19
Properly reseat the wireless card.
Did this fix the problem?
Step 20
If there is an attached antenna, is the antenna damaged?
Step 21
Replace the antenna.
Did this fix the problem?
Yes
Problem resolved.
Go to step 13.
Problem solved.
Replace the controller
board. See
board removal" on
page
Go to step 17.
Problem resolved.
Go to step 18.
Go to step 20.
Problem resolved.
Go to step 22.
Problem resolved.
Diagnostic information
196
No
Go to step 12.
Go to step 15.
Go to step 14.
Contact the network
"Controller administrator.
349.
Go to step 16.
Go to step 17.
Contact the network
administrator.
Go to step 19.
Go to step 20.
Go to step 21.
Go to step 22.
4063