6
Remove the output bin sensor cover. See
7
Remove the sensor (standard bin full) with actuator. See
8
Remove the standard bin cover. See
9
Remove the control panel. See
(4.3‑inch screen, 7‑inch screen)" on page
10
Disconnect the right recoil spring.
11
Remove the controller board access shield. See
12
Disconnect the control panel ribbon cable (A) from the controller board.
"Output bin sensor cover removal" on page
"Standard bin cover removal" on page
"Control panel removal (2.4‑inch screen)" on page
381.
"Controller board access shield removal" on page
Repair information
404
"Sensor (standard bin full) removal" on page
330.
326.
329.
375or
"Control panel removal
351.
4063