6
Remove the output bin sensor cover. See
7
Remove the sensor (standard bin full) with actuator. See
8
Remove the standard bin cover. See
9
Remove the control panel. See
(4.3‑inch screen, 7‑inch screen)" on page
10
Disconnect the left recoil spring.
11
Remove the e-clip (A) securing the pin to the left control panel hinge.
12
Remove the pin (B).
13
Remove the controller board access shield. See
"Output bin sensor cover removal" on page
"Standard bin cover removal" on page
"Control panel removal (2.4‑inch screen)" on page
381.
"Controller board access shield removal" on page
Repair information
401
"Sensor (standard bin full) removal" on page
330.
326.
329.
375or
"Control panel removal
351.
4063