Lexmark MS81x Service Manual page 53

Error code Description
200.03 Media is late reaching the sensor (input)
within the specified time.
200.05 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = MPF tray)
200.07 Media reached the sensor (input) but did not
clear it within the specified time.
200.08 Media is late reaching the sensor (input)
within the specified time.
200.09 The proper main motor feedback to start
laser servo was not received.
200.10 Printhead motor was not locked when page
reached the sensor (input).
200.11 Printhead motor fell out of lock after the
page reached the sensor (input).
200.12 Printhead was not ready for the page when
the sensor (input) was reached.
200.13 The page at the sensor (input) is not the next
page to be imaged.
200.14 Proper main motor feedback to start laser
servo was not received.
200.15 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 1)
200.16 Main drive motor stalled.
200.17 Fuser motor stalled.
200.19 Paper never reached the sensor (input), but
it was successfully picked from the source.
200.25 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 2)
200.32 Detected sensor (control panel interlock)
bounce.
200.33 Printhead was not ready for page when
sensor (input) was reached.
200.34 Short media detected.
200.35 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 3)
Action
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 56.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 57.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 57.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 56.
See "Main drive motor control jam service check" on page
59.
See "Printhead motor control jam service check" on page
59.
See "Printhead motor control jam service check" on page
59.
See "Printhead motor control jam service check" on page
59.
See "Sensor (input) miscellaneous jam 1 service check" on
page 60.
See "Main drive motor control jam service check" on page
59.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 57.
See "Main drive motor control jam service check" on page
59.
See "Fuser drive motor control jam service check" on page
60.
See "Sensor (input) miscellaneous jam 1 service check" on
page 60.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 57.
See "Sensor (input) miscellaneous jam 2 service check" on
page 61.
See "Printhead motor control jam service check" on page
59.
See "Sensor (input) miscellaneous jam 3 service check" on
page 61.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 57.
Diagnostic information
53
4063