Table of Contents
Advertisement
•
"Key Repeat Rate" on page 250
•
"Wiper Message" on page 251
•
"Clear Supply Usage History" on page 251
•
"Clear Custom Status" on page 251
•
"USB Speed" on page 251
•
"Automatically Display Error Screens" on page 252
•
"USB PnP" on page 252
The Configuration menu group consists of menus, settings, and operations that are used to configure a printer for
operation.
Entering configuration mode
The Configuration Menu group contains a set of menus, settings, and operations which are infrequently required by a
user. Generally, the options made available in this menu group are used to configure a printer for operation.
1
Turn off the printer.
2
Press and hold the 2 and 6 buttons simultaneously.
3
Turn on the printer.
4
Release the buttons after 10 seconds.
Roller Kit Counter Value
When this setting is selected, the printer displays the current value for the Roller Kit counter. A print job containing a
single page increments the counter by one and a duplex page by two. When the value has reached the rated life of the
Roller Kit, it reminds the customer that scheduled maintenance is required. Reset this counter after an 81 Replace
Roller Kit message displays and a Roller Kit is installed. See
To view the maintenance kit count:
1
From the Configuration menu, navigate to Roller Kit Counter Value.
The value is displayed and cannot be changed.
2
Press Back or X to return to the Configuration menu.
Reset Roller Kit Counter
After scheduled maintenance, the roller count value must be reset to zero.
To reset the maintenance count value to zero:
1
From the Configuration menu, navigate to Reset Roller Kit Counter.
2
Depending on the printer model, press OK or touch
the counter.
Once initiated, the reset operation cannot be canceled. When the operation is complete, the menu returns to the main
Configuration Menu.
"Reset Roller Kit Counter" on page
to reset the counter, or press X to exit without resetting
Service menus
243
4063
243.
Hide quick links:
Advertisement
Table of Contents
