Output expander sensor cover removal
Note: This is not a FRU.
1
Remove the top cover. See
2
Push the latches (A) to release, then remove the sensor cover.
Sensor (media bin full) with flag removal
1
Remove the top cover. See
2
Remove the sensor cover. See
3
Remove the two screws (A) securing the sensor brace.
4
Disconnect the cable (B), and remove the sensor (media bin full) with flag.
"Output expander top cover removal" on page
"Output expander top cover removal" on page
"Output expander sensor cover removal" on page
Repair information
449
446.
446.
449.
4063