List of Error Messages
This section explains the various messages that appear on the touch panel display,
along with possible causes and remedies.
For explanations of messages that are not listed here, see the Sending and
Facsimile Guide and Network Guide.
Self-Diagnostic Display
If the machine displays a self-diagnostic error message, follow the instructions on
the touch panel display.
Self-diagnostic error messages appear on the touch panel display at the following
times:
•
When scanning or printing cannot be performed because of an operational error.
•
When you need to make a decision or take some action during scanning, copying,
or printing.
•
When you need to make a decision or take some action while browsing the
network.
8
The following is a list of self-diagnostic error messages, along with their possible
causes and remedies.
Load paper.
Cause 1
Remedy
Cause 2
Remedy
Load LTR size paper.
Cause
Remedy 1 Load the indicated paper size into the machine. If you press
8-76
List of Error Messages
The machine has run out of paper. No more prints can be made.
Load paper. (See "Paper Drawers," on p. 7-2.)
The paper drawer is not correctly inserted.
Insert the paper drawer as far as it will go. (See "Paper Drawers," on p. 7-2.)
The optimum paper size selected by the Automatic Paper Selection mode is not
available in the machine.
message is displayed, prints are made with the currently selected paper size.
(Start) while this