Canon imageRUNNER C3489 Reference Manual page 269

NOTE
•
Before setting <Use SSL> to 'On', it is necessary to set a default key in Network
Settings (from the Additional Functions screen). (See Chapter 3, "Using a TCP/IP
Network," in the Network Guide.)
•
The Remote UI is enabled only after you restart the machine (the main power
switch is turned OFF, and then back ON). For instructions on restarting (turning the
main power switch OFF and then ON) the machine, see "Main Power and Control
Panel Power," on p. 1-14.
•
Any changes made to <Use SSL> are also applied to <Use SSL> in <Use HTTP>
in MEAP Settings in System Settings (from the Additional Functions screen).
6-21
Remote UI
6