Canon imageRUNNER C3489 Reference Manual page 96

2
2-52
Making Prints Using the Stack Bypass
❑
Press [OK] ➞ proceed to step 6.
If the following screen is displayed, press [OK] ➞ adjust the width of the slide
guides ➞ specify the desired paper size.
If the following screen is displayed, adjust the width of the slide guides to
match the paper size stored in Stack Bypass Standard Settings, or set Stack
Bypass Standard Settings to 'Off' in Common Settings (from the Additional
Functions screen). (See "Standard Paper for the Stack Bypass," on p. 4-48.)
IMPORTANT
Set the paper size to the same size as the paper loaded in the Stack Bypass.