Canon imageRUNNER C3489 Reference Manual page 41

4
When the following screen appears, wait for the machine to
complete the shutdown process.
If you need to immediately operate the machine after starting the shutdown
process, press [Restart] ➞ [Yes].
If you press [Restart] when device information is being updated, a message
asking for your confirmation to continue appears on the screen. Press [Yes].
CAUTION
You can also force the shutdown of the machine (omitting the normal job
cancellation process) by pressing [Forced Off]. If you press [Forced Off]
while data is being processed or the machine is shutting down, a message
asking for your confirmation to continue appears on the screen. Press
[Yes]. However, as it is possible that this will destroy data which is being
processed or cause damage to the machine, it is not recommended. Note
that Canon will not be liable for any damages resulting from the loss of
data on the hard disk drive. For more information, contact your local
authorized Canon dealer.
NOTE
•
It may take some time for the machine to completely shut down depending on the
application you are using.
•
The screen below is displayed when you press [Forced Off] in any of the following
cases.
- When the hardware is in finishing process
- When device information is being updated
Main Power and Control Panel Power
1
1-23