Saddle Stitch Position Adjustment - Canon imageRUNNER C3489 Reference Manual

IMPORTANT
•
Only use 12" x 18", 11" x 17", LGL, or LTRR paper for the saddle stitch staple
repositioning procedure.
•
Make sure to remove all output booklets from the optional Booklet Tray before performing
the saddle stitch staple repositioning procedure.
NOTE
•
Saddle stitch staple repositioning can be performed only if the optional Saddle
Finisher-Y2 is attached.
•
Paper that is required for the saddle stitch staple repositioning procedure is automatically
fed to the saddle stitcher unit by the machine.
1
Press
[Saddle Stitcher Staple Repositioning].
2
Press [Start].

Saddle Stitch Position Adjustment

If you are using the Saddle Stitch mode of the optional Saddle Finisher-Y2, and you
notice that the folds of the paper are not exactly in the middle of the booklet, you
can make adjustments to the saddle stitch position to compensate for this error.
NOTE
The saddle stitch position can only be adjusted if the optional Saddle Finisher-Y2 is
attached.
1
Press

[Saddle Stitch Position Adjustment].

2
Select the paper size for which you want to adjust the saddle
stitch position.
NOTE
Some of the paper sizes displayed may not be available in certain countries.
3
Press [▼] or [▲] to adjust the saddle stitch position ➞
press [OK].
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Adjusting the Machine
4
4-67