Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the
feeder, clean the roller of the feeder by repeatedly feeding blank sheets of paper
through it.
IMPORTANT
This procedure is necessary only if the optional Feeder (DADF-L1) is attached.
NOTE
It takes approximately 25 seconds to clean the feeder.
1
Press
[Feeder Cleaning].
2
Place 10 sheets of blank paper into the feeder ➞ press [Start].
Make sure that you fan the sheets of paper well.
Use LTR paper (16 to 20 lb bond (60 to 80 g/m
When cleaning is complete, try scanning again.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
2
)).
Routine Cleaning
7
7-63