IMPORTANT
•
To prevent other users from accidentally erasing all the data on the hard disk, it is
recommended to register a System Manager ID and System Password so that only the
System Manager can perform this procedure.
•
Confirm that there are no current jobs being processed before using the Initialize All
Data/Settings mode.
•
Make sure to back up necessary data before you erase the data. For information on the
data that can be backed up, see "Backing Up Data," on p. 1-9.
•
You cannot access the machine while the hard disk is being initialized.
•
The Initialize All Data/Settings mode does not delete any data the machine has stored on
a server or computer.
1
(Additional Functions) ➞ [System Settings] ➞
Press
[Initialize All Data/Settings].
2
Press [Yes].
It may take more than 30 minutes to initialize the hard disk.
IMPORTANT
If there are any current jobs being processed, they will be canceled, and then
erased.
3
After the hard disk is initialized, press the main power switch
to the " " side.
IMPORTANT
After the hard disk is initialized, and the printed colors are different from the colors
printed before the hard disk is initialized, perform [Full Adjust] in Automatic
Gradation Adjustment. For more information, see "Automatic Gradation
Adjustment," on p. 4-68.
Initializing All Data/Settings
6
6-63