Finisher-Y1, Saddle Finisher-Y2, and Puncher
Unit-M1
The Finisher-Y1 and Saddle Finisher-Y2 are equipped with the following finishing
modes: Collate, Group, Offset, and Staple.
The Saddle Finisher-Y2 is also equipped with the Saddle Stitch mode.
The Puncher Unit-M1 is equipped with the Hole Punch mode.
IMPORTANT
•
To attach the Finisher-Y1 or Saddle Finisher-Y2, the optional Buffer Pass Unit-E2 is
required.
•
The Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1 are not available for the
Color imageRUNNER C2550.
NOTE
•
Either the Finisher-Y1 or Saddle Finisher-Y2 can be attached to the main unit.
•
The Puncher Unit-M1 can be attached only if the Finisher-Y1 or Saddle Finisher-Y2 is
attached.
Parts and Their Functions
j
i
h
g
a b
c
d
Saddle Finisher-Y2, Puncher
Unit-M1, and Buffer Pass Unit-E2
Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1
j
i
f
Finisher-Y1
3
a e
3-25