Canon imageRUNNER C3489 Reference Manual page 473

Remedy 2 If the message continues to be displayed even if the indicated paper size is
loaded, set Drawer Eligibility For APS/ADS in Common Settings (from the
Additional Functions screen) for that paper drawer to 'On'. (See "Auto Paper
Selection/Auto Drawer Switching," on p. 4-33.)
Return page 1 to the top, and then press the Start key.
Cause Scanning was stopped due to a problem with the optional feeder.
Remedy Arrange the originals in page order with the first page on top. Place the originals
back into the feeder's original supply tray, and press
Return page 1 to the top, and then press the Start key. (Data for the scanned original has
exceeded limits on the size that can be handled by this machine. Automatically adjust
settings and try again.)
Cause Scanning was stopped because the data size of the scanned original exceeded
the maximum data size that the machine can handle.
Remedy Try scanning the original again from the first page. If scanning is still not
possible, reduce the Sharpness mode setting, and select [Text] for the original
type.
Scanning has stopped because the size of the data for the scanned original exceeds the
limit. Scanning may be possible if [Sharpness] is reduced and the type of original is set to
[Text].
Cause Scanning was stopped because the data size of the scanned original exceeded
the maximum data size that the machine can handle.
Remedy Reduce the Sharpness mode settings, and select [Text] for the original type.
Remove the paper from the output tray.
Cause Prints from the previous job remain in the output tray.
Remedy Remove the prints remaining in the output tray. Printing automatically resumes.
Remove the paper from the booklet tray.
Cause Prints from the previous job remain in the Booklet tray of the optional Saddle
Finisher-Y2.
Remedy Remove the prints remaining in the Booklet tray. Printing automatically
resumes.
(Start).
List of Error Messages
8
8-77