1
Press
[Number of Copies/Job Duration Status Display].
2
Select [On] or [Off] ➞ press [OK].
Clean the Original Scanning Area Prompt
You can use the Cleaning Display for the Original Scanning Area mode to prompt
you to clean the scanning area when the machine detects streaks or stains. If the
feeder is not clean, the machine will scan and print dust and grime on the output.
The Clean the Original Scanning Area Prompt appears when originals are placed in
the feeder. For instructions on cleaning the feeder's scanning area, see "Manual
Feeder Cleaning," on p. 7-56.
NOTE
[Cleaning Display for the Original Scanning Area] appears only if the optional Feeder
(DADF-L1) (standard-equipped for the Color imageRUNNER C3480i/C3080i) is
attached.
1
Press
[Cleaning Display for the Original Scanning Area].
2
Select [On] or [Off] ➞ press [OK].
Data Compression Ratio for Remote Scans
You can set the compression ratio for network scanning. A high compression ratio
reduces the amount of memory used for scanning the document, but results in a
lower image quality. On the contrary, a low compression ratio increases the amount
of memory used for scanning the document, but results in a higher image quality.
NOTE
For more information on the Network Scan function, see the Color Network ScanGear
User's Guide.
1
Press
Compression Ratio for Remote Scans].
(Additional Functions) ➞ [Common Settings] ➞
(Additional Functions) ➞ [Common Settings] ➞
(Additional Functions) ➞ [Common Settings] ➞ [Data
Specifying Common Settings
4
4-59