6
6-70
Setting the Secure Watermark Mode
● If you select [Copy Set Numbering]:
❑
Enter the starting number using
● If you select [Serial Number]:
❑
Press [Next].
NOTE
The serial number that is displayed in the Job/Print Status Display Area when you
press
(Counter Check) on the control panel is printed.
● If you select [ID/User Name]
❑
Press [Next].
NOTE
•
If you are using a login service, the name of the Department ID/User logged in is
printed.
•
If you are not using a login service, the "COPY" watermark is printed.
(numeric keys) ➞ press [Next].
-