Canon imageRUNNER C3489 Reference Manual page 480

# 853
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
Cause 4
Remedy
8
Cause 5
Remedy
# 854
Cause
Remedy
8-84
List of Error Messages
When trying to print a large number of pages, the job is not performed due to
insufficient memory resources.
Reduce the number of pages to print, or perform the print job again when no
other jobs are reserved.
The job could not be processed, because it was canceled from the printer driver
while the print data was being sent to the machine.
Try printing again.
The spool memory is full when Use Spooler in Network Settings in System
Settings (from the Additional Functions screen) is set to 'On', therefore, data
received from the host could not be spooled.
Set Use Spooler in Network Settings in System Settings (from the Additional
Functions screen) to 'Off', and try sending the print data again. (See Chapter 3,
"Using a TCP/IP Network," in the Network Guide.)
The maximum number of receivable data exceeds the receive limit. (See
Chapter 6, "Receiving Documents," in the Sending and Facsimile Guide.)
Try printing the documents again after all current jobs are complete. If you still
cannot print, check the sent data
The number of secured documents exceeded the maximum limit that can be
reserved at a time.
Print or erase the secured documents that are stored in the machine, and try
printing again.
Device information could not be delivered because the client machine has
Restrictions for Receiving Device Info. in Device Information Delivery Settings in
System Settings (from the Additional Functions screen) set to 'On'.
Try delivering device information again after setting Restrictions for Receiving
Device Info. in Device Information Delivery Settings in System Settings (from
the Additional Functions screen) to 'Off'. (See "Checking/Printing the
Communication Log," on p. 6-60.)