Canon imageRUNNER C3489 Reference Manual page 192

2
4
3
4-36
Specifying Common Settings
Select the paper source in which you want to register the
paper type ➞ press [Settings]
The numbers on the screen represent the following paper sources:
The optional Cassette Feeding Unit-Y3 and Paper Deck-Z1 are attached.
Select the desired paper type loaded in the paper source ➞
press [OK].
Make sure that the registered paper type setting is the same paper type that is
loaded in the paper source.
If you selected the optional Paper Deck-Z1 as the paper source, [Transparency]
is not displayed on the Register Paper Type screen.
To adjust the toner fixing, press [Plain Paper Print Settings]. If the toner appears
to have fixed too much, press [Thin]. If the toner does not appear to have fixed
well, press [Heavy].
IMPORTANT
If you select [Transparency] as the paper type loaded in the paper source, but load
plain paper instead, a paper jam may occur. Make sure to load transparencies into
the paper source.
Paper Drawer 1
Paper Drawer 2
Paper Drawer 3 (optional)
Paper Drawer 4 (optional)
Paper Deck-Z1 (optional)