Canon imageRUNNER C3489 Reference Manual page 98

6
2
7
8
2-54
Making Prints Using the Stack Bypass
Press [Done].
If you selected [Transparancy] in step 5, press [Overhead Project. Type] and
select either [Transmissive] or [Reflective].
If you press [Stack Bypass Settings], follow the procedures and screens in step 4
to reset the paper size and type settings.
If the Copy function is selected, place your originals ➞ select
the desired copy settings.
If you are printing documents that are stored in an inbox, this step is not
necessary.
Press (Start).
If you are printing documents that are stored in an inbox, press [Start Print].
Scanning starts.
NOTE
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Paper Size/Type Selected
Paper Size/Type
Currently Loaded