Table of Contents
Advertisement
No.
193:
194:
195:
196: - 212:
213:
214:
215:
216: - 350:
If any operation error occurs after changing the setting value, change the setting value to the original one.
15.6.2 <024:CIS scan position during ADF scanning>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
This value is used when automatic scan position adjustment (TESTMODE>"2"SCAN TEST>"3"SHEET POS ADJ) fails.
15.6.3 <026:Distance from the standby position of CIS to the shading start point>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
White shading can be adjusted finely.
Normally, do not change the setting value. If any operation error occurs after changing the setting value, change the setting value to the original one.
15.6.4 <031: Vertical scan start position adjustment>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Adjust the position at which vertical scanning of a book starts. The larger the adjustment value, the narrower the left-side margin of the image becomes.
15.6.5 <032: Horizontal scan start position adjustment>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Adjust the position at which horizontal scanning of a book starts. The larger the adjustment value, the narrower the top margin in the image becomes.
15.6.6 <033: Vertical scan magnification correction>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Correct the magnification of vertical scanning of a book. The larger the adjustment value, the more the image stretches in the vertical scanning direction.
15.6.7 <034: Horizontal scan magnification correction>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Correct the magnification of horizontal scanning of a book. The larger the adjustment value, the more the image stretches in the horizontal scanning direction.
15.6.8 <035: - 036:Reader motor speed change>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Though no market adjustment work needs to be carried out, enter factory defaults at image processor PCB replacement.
15.6.9 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the
image becomes.
15.6.10 <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Adjust the position at which horizontal scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the top margin of the image
becomes.
Function
ADF special paper, standardized size: LGL
misidentification-ready
ADF special paper, standardized size: LTR
misidentification-ready
ADF special paper, standardized size: LTR_R
misidentification-ready
Not used
XYZ correction value of (X) of standard white
plate (equipped with SEND functions)
XYZ correction value of (Y) of standard white
plate (equipped with SEND functions)
XYZ correction value of (Z) of standard white
plate (equipped with SEND functions)
Not used
Default
Setting range
0
0 : LEGAL
1 : FOOLSCAP
2 : M_OFFICIO
3 : A_FOOLSCAP
4 : FOLIO
5 : G_LEGAL
6 : A_OFFICIO
7 : B_OFFICIO
0
0 : LTR
1 : G_LTR
2 : A_LTR
0
0 : LTR_R
1 : FOOLSCAP
2 : OFFICIO
3 : E_OFFICIO
4 : G_LTR_R
5 : A_LTR_R
8273
1-9999
8737
1-9999
9427
1-9999
Chapter 15
Unit
15-19
0013-1356
0013-1357
0013-1358
0013-1359
0013-1360
0013-1361
0013-1362
0013-1363
0013-1364
Advertisement
Table of Contents
