Saddle Stitch Position Adjustment - Canon IMAGERUNNER 5075 Reference Manual

NOTE
•
Saddle stitch staple repositioning can be performed only if the optional Saddle
Finisher-AD2 is attached.
•
Paper that is required for the saddle stitch staple repositioning procedure is automatically
fed to the saddle stitcher unit by the machine.
1
2
4

Saddle Stitch Position Adjustment

If you are using the Saddle Stitch mode of the optional Saddle Finisher-AD2, and
you notice that the folds of the paper are not exactly in the middle of the booklet,
you can make adjustments to the saddle stitch position to compensate for this error.
NOTE
The saddle stitch position can only be adjusted if the optional Saddle Finisher-AD2 is
attached.
1
2
3
4-60
Adjusting the Machine
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Press
[Saddle Stitcher Staple Repositioning].
Press [Start].
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Press

[Saddle Stitch Position Adjustment].

Select the paper size for which you want to adjust the saddle
stitch position.
NOTE
Some of the paper sizes displayed may not be available in certain countries.
Press [▼] or [▲] to adjust the saddle stitch position ➞
press [OK].