Touch Tone On/Off !/1; Transfer - Comdial DX-80 Installation & Maintenance Manual

•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function has
been performed. Please refer to the Programming section of this manual to learn more about this procedure.
Touch Tone On/Off
Touch Tone On/Off can be used to customize a users telephone tactile response of dial pad key operation. At default
(factory setting), Touch Tone is ON. While ON, anytime the dial pad button/keys are pressed the telephone will emit a
subtle beep tone as an assurance that this button operation was successful. Since this confirmation may not always
be necessary, the tone can be turned off.
Related Features
All features accessed using the Dial Pad.
Operation – Setup
1. While the telephone is idle, press
2. The current mode is toggle to the opposite setting.
3. Repeat these steps to select the appropriate mode of operation.

Transfer

Transfer is used to deliver calls at your extension to another extension while maintaining the privacy of the
connection. This means that calls can be routed to DX-80 system destinations (Extensions, UCD Groups, Virtual
Numbers, etc.) in such a way that the wrong party cannot easily intercept them.
There are two (2) types of transfer you may use: Screened/Supervised Transfer and Unscreened/Unsupervised
Transfer. Supervised Transfer means that before the transfer is completed, the call is announced to the destination
extension. This transfer method provides the transferring party with the option to reroute the call being transferred if
the selected destination is determined not appropriate. Unsupervised Transfer simply delivers the call to the
destination selected regardless of the destination readiness to accept the call.
When you complete a transfer the outside line is placed on Exclusive Hold and can be retrieved only at your
telephone or the telephone where you transferred the call.
Calls that are transferred are subject to a unique transfer recall time. Transferred calls that go unanswered at the
destination will recall (ring) to the transferring party when this timer expires. There are two recall timers that affect
transferred calls: Transfer-Busy Recall Time and Transfer-Idle Recall Time. Idle and Busy represent the status of an
extension for unsupervised transfer scenarios. (If the extension destination is busy, the Transfer-Busy Timer is used.
If the extension destination is idle, the Transfer-Idle Timer is used.)
Related Features
Transfer and Answer Call
Call Forward
Call Park / Call Park Answer
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
!/1
.
3-235
M
ANUAL
!/1
Recall
Forced Intercom Tone Ring