Messaging - Status Text !90 - Comdial DX-80 Installation & Maintenance Manual

•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Messaging – Status Text
Each digital telephone may invoke an extension status display message to inform other users of the current status of
the extension/user. There are six programmed messages that may be used and one user-customizable message.
Whenever another digital speakerphone calls the extension with this Status message active, the message displays at
the calling extension.
Operation – Setup
1. The extension must be idle.
!90
2. Press
3. To input a custom message:
chg
Press [ ], then use the alpha-numeric chart and dial-pad to write the message.
save
Press [ ].
next
Otherwise, press [
4. To activate the message for status indication, press [
P7290 IMM
DX-80 I
NSTALLATION AND
. The display shows the first message choice (customizable):
EMPTY
store next chg
] until the appropriate pre-programmed message to displayed.
3-181
M M
AINTENANCE ANUAL
store
].
!90
*
= lower case letter
Number +