Tone / Pulse / Inter-Digit Duration Selection - Comdial DX-80 Installation & Maintenance Manual

•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
Program CO Lines for the COS to follow:
¢£¤¥
•
Use to highlight "CO Line" and then press
¢£¤¥
•
Use to highlight "Category 2" and then press
¢£¤¥
•
Use to highlight the COS Day or Eve of the CO Line for which changes are to be made.
«
•
Press until the appropriate COS assignment displays.
•
Continue making other programming changes as required.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function has
been performed. Please refer to the Programming section of this manual to learn more about this procedure.

Tone / Pulse / Inter-digit Duration Selection

Depending on the outside plant environment, type of Central Office, and customer's specialized dialing requirements,
the DTMF "on" time (Tone) and Pulse Dialing – Pulse Time and Pulse Dialing – Inter-Digit Time for manually dialed or
system automatically dialed digits may be modified. Typically, no modification is required however, in some
installation environments where outside plant equipment is becoming antiquated or line conditions are poor, tone
duration and/or inter-digit duration timing may be increased to offset these poor conditions.
Related Features
CO Line Signaling
Related Programming
Call Handling – Dialing Ratio – Break Time, Inter-Digit Time, Tone Time
Conditions
a) A longer tone duration or inter-digit duration time will cause a slower output of manual or automatic system-
dialed numbers.
b) A longer DTMF "on" time and/or inter-digit tone time can be used to ensure more reliable interaction with
remote voice mail and similar remote DTMF dial pad actuated devices.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database-programming screen. You will
3-233
M
ANUAL
«
.
«
.