Call Pick Up - Group - Comdial DX-80 Installation & Maintenance Manual

Operation – Park Call
1. While connected to a CO Line call, press
code.
2. Dial the extension number where this call is to be parked, or press the DSS button of the extension where
this call is to be parked.
3. The CO Line call is parked at that extension.
4. Go on-hook or proceed with other system functions.
Note: Multiple calls may be parked on one extension.
Operation – Call Park Answer
1. From an idle extension, press
2. Dial the extension number where this call is to be parked, or press the DSS button of the extension where
this call is to be parked.
3. You are connected to the call.
Analog Ports (Single Line Telephones)
#73
1. Dial .
2. Dial the extension number where the call is parked.
Conditions
a) Each telephone/extension has one personal extension number used to park one CO line call.
b) From your telephone you can park a call at any assigned and installed extension number.
c) The Call Park feature code may be programmed on any programmable feature button.
d) Calls can be retrieved from any extension.
e) CO lines that have been parked are on Transfer Hold at the extension that where the call was parked and on
I-Hold at the extension that parked the call.
f) Any extension can retrieve a "parked" CO line, even if the extension is normally not allowed to access or
receive a call on that line.
g) A user invokes "Call Park Answer" and has no CO line button for the line retrieved from call park may use
Hold Call Answer to place the call on hold and retrieve the call from hold.
h) The Call Park Answer feature code may be programmed on any programmable feature button.
i) Calls that are parked follow the Transfer Recall Timer and will ring the initiating extension when that timer
has elapsed.
Programming Abstract
Use the related feature definition programming instructions to program the various related operations.
Call Pick Up – Group
You may answer calls ringing at another extension using the Call Pick Up Group feature. This feature allows you to
easily access calls ringing in your group via the single digit code
groups may also be answered using the code assigned to that pick up group. (Pick Up Group 1 is assigned "440," PU
Group 8 is assigned "447.")
Use Call Park Pick Up (reference Call Park) to retrieve calls in a Directed Call Pick Up manner.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
!73
!73
or press a button programmed for this Call Park code.
3-54
M
ANUAL
or press a button programmed for this Call Park
*
. Calls ringing at extensions in other pick up
*