Co Line Assignment - Comdial DX-80 Installation & Maintenance Manual

•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Assignment

CO Line Assignment is the DX-80 system utility used to assign CO Lines to extensions for out-calling access. The
DX-80 system allows the assignment of CO Lines to extensions in a matrix fashion such that complete flexibility is
possible. Each CO Line may be assigned individually as accessible or not accessible by each extension.
Related Features
Tenant Group
CO Line Group
Related Programming
Extension - Line Assignment
CO Line - Tenant Group, CO Line Group, Private To
Operation
Press an available (idle) CO Line button or dial a CO Line Group access code (9, 800-806)
Conditions
a) An extension that attempts access to a CO Line that is not assigned for access at that extension will hear
error tone and the display will show: CO LN UNAVAIL.
b) Extensions that are not assigned access to a CO Line may receive that CO Line via Transfer. However once
the transferred call is disconnected, that extension cannot re-access the same CO Line for use.
c) Tenant Group programming of extensions and CO Lines also dictates which CO Lines an extension can
access. See Tenant Group.
Default Settings
All DX-80 extensions are allowed access to all equipped (hardware installed) CO Lines.
All CO Lines are assigned in Tenant Group 1. (Range is 1-3.)
All CO Lines are assigned in CO Line Group 1. (Range is 1-8.)
Programming Abstract
Program the required extensions for Line (CO Line) Access per CO Line.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
M M
AINTENANCE ANUAL
Private Line
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
3-65