Feature Key Programming - Comdial DX-80 Installation & Maintenance Manual

¢£¤¥
•
Use to highlight the category of your choice then press
programming database parameters as required.
¢£¤¥
•
Use to highlight the various menu levels and database parameters. Then press
that level/parameter.
•
There are many menu levels within Database Programming. It is often necessary to use
all elements of some categories.
°
•
Use to exit one category and return to the previous level.
•
When all changes in a category have been made press the
programming screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to move up through the menu levels.
•
You may continue making other programming changes,
Or...
•
Exit PC-DBA programming, to do so:
•
Continue pressing
¢£¤¥
•
Use
Note: Changes made via PC-DBA are stored in the working directory and not updated to the DX-80
system memory until a "SEND" function has been performed.
•
Use the information found with each feature description for specific details on programming the various
features.
Database Save and Restore:
working directory
The
session is in progress. It is often desirable to save the data in this directory for later retrieval since work on
many various databases may be required.
Important Note:
current contents of the working directory.
P7290 IMM
DX-80 I
NSTALLATION AND
+------------------------------+
¦ Database Programming
+------------------------------¦
¦ Extension
¦ CO Line
¦ Call Handling
¦ System Resource
¦ Restriction
¦ Extension Application
¦ CO Line Application
¦ System Application
¦

Feature Key Programming

¦ KSU DB Password
+------------------------------+
°
(escape) until the "Main" menu is again in view.
to highlight "Exit to DOS." Then press
is the location allocated in the PC for all changes while the PC-DBA programming
Always use Database Save prior to Database Restore if you intend to preserve the
M M
AINTENANCE ANUAL
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
«
to open that category and begin
°
(escape) key to exit that database
«
.
3-97
«
to open
³ ´
and to view