Voice Announce - Hands-Free Reply !98 - Comdial DX-80 Installation & Maintenance Manual

•
Input the extension directory number of the analog extension to be programmed as a member of this UCD
Group. Then press
•
Continue making programming changes as required.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Voice Announce – Hands-free Reply
The Digital Speakerphone provides the ability to receive incoming intercom calls in Voice Announce Hands-free
mode. When your telephone is in this mode, you can reply to an intercom call by using the speakerphone.
You may also choose to place your Digital Speakerphone in Voice Announce - Privacy mode. In this mode, you can
hear the person intercom calling you but your Digital Speakerphone's microphone remains muted so the person
calling cannot hear you. Therefore calls may be announced to your extension while maintaining a private
environment.
In addition to Voice Announce – Hands-free and Voice Announce – Privacy modes a third mode is available called
Tone Ring mode. When Tone Ring mode is active, the telephone will tone ring whenever an intercom call is made to
that telephone.
Each time the feature code
heard and associated visual indications are given. Refer to the table below.
Related Features
Distinctive Ringing – Extension
Forced Intercom Tone Ring
P7290 IMM
DX-80 I
NSTALLATION AND
«
.
°
(escape) key to exit this database-programming screen. You will
!98
is dialed, the next mode in sequence is selected, the associated tone is
M M
AINTENANCE ANUAL
Do Not Disturb
3-249
!98