Setting Fax Management; Setting The Send Start Speed - Canon 3300 Series Manual

Setting Fax Management

This section describes settings that the system manager can make, including how to set the
send start speed, receive start speed, RX mode, and register a password. It also describes
how to set, change, and erase settings for transferring received fax documents, and how to
enable or disable certain settings.
IMPORTANT
•
When a system setting ID has been selected, the screen for entering the ID is displayed after
pressing "System Settings." Enter the ID, and make the settings.

Setting the Send Start Speed

This function enables you to change the send start speed when it takes too much time to
start sending a document.
NOTE
•
The default setting is "33600bps."
1
Call up the desired screen as follows:
Send Start Speed
When a Department ID and password are set, enter them after pressing "System Settings,"
and press
(Additional
Functions)
(ID).

Setting Fax Management

6
6-3