3
Enter the password using
If you set a password, it is necessary to enter the password whenever you want to change
the Transfer settings or switch between setting and canceling the Transfer mode.
Enter a password of a one to seven-digit number.
If you do not want to set a password, press "Next" without entering one.
IMPORTANT
•
There is no method of verifying the set password, so do not forget it.
•
You cannot set the transfer function while communication is taking place or when there are
documents in memory.
NOTE
•
If you make an incorrect entry, press
4
Press "Address Book."
You can also specify the destination using
Dialing," and enter the Coded Speed Dialing number → press "Next" → proceed to step 6.
(See 'Specifying with Coded Speed Dialing,' on p. 2-24.)
For instructions explaining how to use the Address Book, see 'Various Dialing Methods,' on
p. 2-19.
Pressing " " or " " displays the prior or subsequent item.
-
(numeric keys), and press "Next."
(Clear), and enter the correct password.
-
(numeric keys). Press "Coded
Setting Fax Management
6
6-7