Receiving A Faxed Document; Paper On Which Received Documents Are Printed - Canon 3300 Series Manual

Image runner

Table of Contents

Receiving a Faxed Document

There are two modes for receiving documents: Memory Lock, in which an automatically

received document is stored in the memory instead of being printed, and Transfer, in which

the document is transferred to another fax machine. (See 'Changing the Receiving Mode (RX

Mode),' on p. 3-16.)

Paper on Which Received Documents are Printed

Received documents are printed on paper from the paper drawer that has the same size

paper as the received document.

If paper of the correct size for the received document is not available, the machine

automatically selects a different size of paper in the following order.

The size of paper is automatically selected in the same order, even if paper runs out during

printing.

11'' x 17''-size originals

LGL-size originals

LTR-size originals

STMT-size originals

* Received documents automatically reduced before being printed on the paper sizes are indicated with an asterisk (*).

IMPORTANT

•

The sizes of paper on which a received document can be printed are 11'' x 17'', LGL, LTR, LTRR,

STMT, and STMTR.

•

If you want to print an incoming document on the paper placed in the stack bypass, select paper

other than Envelopes. (See the Reference Guide.)

NOTE

•

You can specify whether or not to use a paper drawer for the Fax function. The default setting is "On,"

except for the stack bypass. (See the Reference Guide.)

•

You can set the machine to reduce received documents to 75%, 90%, 95%, or 97% if the document

is larger than any of the available paper sizes. (See 'Printing Received Documents in Reduced

Form,' on p. 5-39.)

•

You can set the machine to print received documents on both sides of the paper. (See 'Two-sided

Printing of Received Documents,' on p. 5-42.)

•

Received documents are printed face down, in the order in which the pages are received.

11'' x 17'' → LGL* → LTR x 2

LGL → LTR x 2 → STMT x 2 → 11'' x 17''

LTR → LGL → STMT x 2 → 11'' x 17''

STMT → LTR → LGL → 11'' x 17''