Canon 3300 Series Manual page 164

NOTE
•
If the parties stored as the relay destination and the relay source machines are not stored in One-
touch Speed Dialing, store them there.
•
If you want to send a TX Relay report, it is necessary to set a restriction on the relay source
machines.
1
2
5
3
5-50 File Settings
Call up the desired screen as follows:
(Additional
Functions)
Select the desired memory box, and press "Store."
Press " "or " " if the desired memory box is not displayed.
To select the desired memory box using
entering the memory box number.
Select "Relay," and press "Next."
- (numeric keys), press "OK" after