Canon 3300 Series Manual page 168

10
Set each relay setting item.
To restrict the relay source machines:
Press "On" next to Orig. Relay UnitRestrict. Specify the allowable relay source
machines under "Address Book" press "Done" press "OK. "
→ →
5
If you do not want to set a restriction, press "Off."
For instructions explaining how to use the Address Book, see 'Various Dialing Methods,' on
p. 2-19.
You can also specify the relay destination using - (numeric keys). Press "Coded
Dialing," and enter the Coded Speed Dialing number. (See 'Specifying with Coded Speed
Dialing,' on p. 2-24.)
Pressing " " or " " displays the prior or subsequent memory box.
NOTE
•
To delete a specified destination (item), press that item, and press "Erase."
To print the received document:
Press "On" next to Print RX Document.
If not specifying printing, press "Off."
To send relay transmission results to the sender (see 'Relay Sequential
Result Report,' on p. 9-7.):
Press "On" next to TX Relay Report.
If not specifying sending results, press "Off."
5-54 File Settings